Το rack περιλαμβάνει 2x GE-134 και 3x GE-234 και 1x Power Distribution .
Specifications
Inputs:
• Type: Electronically balanced. Transformer balancing op-
tional.
• Input impedance:10KOhm. Equal impedance for + and - legs.
• Maximum input level: +21dBu.
• Input connector: XLR-3F
Pin 1 Floating
Pin 2 Signal + (hot)
Pin 3 Signal - (cold)
Outputs:
• Type: Electronically balanced and floating, simulating trans-
former output. Active transformer balancing optional.
• Output impedance: 100 Ohms / 50 Ohms each leg.
• Maximum output level: +21dBu into 600 Ohms or greater.
• Output connector: XLR-3M
Pin 1 Ground
Pin 2 Signal + (hot)
Pin 3 Signal - (cold)
General performance:
• Frequency response: ±0.5dB, 20Hz-20KHz (all controls flat).
• THD: <0.005%, 20Hz-20KHz.
• Noise: <-93dBu, 22Hz-22KHz unweighted, graphic equaliser
in circuit 0dB settings.
• Channel separation: > 80dB 20Hz-20KHz (GE234).
• Level meter display: 8 led average calibrated peak respond-
ing headroom indication in 3dB steps. Clip led lights for ap-
proximately 200ms if the instantaneous peak voltage at any
potential overload point in the unit comes within 1 dB of clip-
ping, independent on level display routing switch position.
• Dynamics control: Continuously variable ±12dB of gain shift
lowers noise floor by 12dB or increases headroom by 12dB.
Changing the DYN control settings will change overall gain of
the unit by no more than ±0.5dB (±0.3dB typical).
Filters:
• Graphic equaliser: 30 near ISO centre frequencies 25Hz-
20KHz 1/3 octave.
Graphic filters centre frequency tolerance < 5%.
Max boost/cut: switcheable 6 or 12dB ±0.5dB reciprocal.
Graphic equaliser switcheable in/out of signal path.
• High pass filter: 15Hz-300Hz frequency range.
Butterwort maximally flat 12dB/octave response.
Switcheable in/out of signal path.
• Low pass filter: 2KHz-40KHz frequency range.
Butterwort maximally flat 12dB/octave response.
Switcheable in/out of signal path.
• Shelving filters: 6dB of boost and cut at 100Hz and 14KHz.
6dB/octave slope.
Power requirements
• Voltage: 85V-264V 50/60Hz.
• Consumption: 12VA (GE134), 20VA (GE234).
• Connector: IEC 3 pin.
Dimensions:
• GE134: 420mm (482.6mm with 19" mounting brackets) wide
x 88.9mm high x 55mm deep.
• GE234: 420mm (482.6mm with 19” mounting brackets) wide
x 133.3mm high x 55mm deep.
Weight:
• GE134: Shipping: 3.1kg; Net: 2.4 kg.
• GE234: Shipping:4.0 kg; Net: 3.3 kg.
Standards:
• Safety: EN60065
• EMC: EN55103-1/EN55103-2/E2/E3
Στην τιμή περιλαμβάνεται Φ.Π.Α. 23%
